(With the door closed the oven becomes a Faraday cage). Opening the door whilst the oven is still working, will stop the oven operating as it is a safety feature designed to prevent harmful microwave radiation from escaping out through the open door.
They are operated by the latch arms on the door. Two that close when the door is shut and one that opens when the door is shut. With a lot of microwave ovens there are 3 separate door interlock switches. If so there may be a problem with one of the door interlock switch contacts remaining closed when it should be open, when the door is opened. Have you been stopping the oven from operating by simply opening the door and not pausing the operation using the control panel, by any chance? What is the model number of the microwave oven?
20 amp fuse how to#
If you don’t know how to safely test microwave oven circuits then don’t do it! Contact a reputable, professional appliance repair service and ask for a quote The HV capacitor needs to be correctly discharged as soon as it is accessible after removing the cover from the microwave and before doing anything else inside the oven. This amount of voltage can seriously injure you or worse. The HV capacitor can store >6000V DC for months even if the power has been disconnected for this length of time. The oven would need to be tested to find out why it happened.īe safety aware when working inside a microwave oven. It also may be somewhere else and it was just coincidental that it occurred when you did this. blow and therefore protect the appliance from further damage due to the fault and also the user e.g. If you caused it by pushing on the control panel then it seems that the problem may be there and that there is not a problem with the fuse as it was only doing what it was designed to do i.e.
It is usually marked on the fuse end caps as 250V T20A (T = Timed or slow blow)īe aware that there is always a reason why a fuse blows. Although ceramic fuses do offer better thermal and arc protection than glass fuses which is why they’re used in microwave ovens and other high current appliances. To be eligible for limited warranty consideration contact Grote customer service at 800.628.0809 (In Canada call 800.268.5612).Generally with fuses as long as you replace it with a fuse having the same rating it is OK to do so.
20 amp fuse full#
You can view the full details of Grote’s warranty here. Customers should contact Grote Industries if detailed information is required.
Deviations from these guidelines will void any warranty.ĭesign Voltage and Current – Current is provided as an approximate value and is listed for the design voltage of the lamp. These guidelines will assure the products will function and last as they were designed. Only Grote ULTRA-BLUE-SEAL® pigtails should interface with any Grote lamps. Number 10 screws should be tightened to 25 in. Surface Mount – The following procedures need to be practiced to assure proper installation: The lamp should be placed on a level unobstructed surface. The installer is responsible for assurance that the application of the component will not result in contact with flammable material. Heat – All electronic and lighting products produce heat. Grote Systems – Grote lamp assemblies and harness products are designed to function as a complete system therefore, this limited warranty shall not extend to failure of any Grote products caused by the use of incompatible lamp assemblies, harness products or other components. To be eligible for warranty on lighting products the following guidelines must be followed when installing Grote products. Grote warrants all Grote products against defects in workmanship or material.
0 kommentar(er)
